º£ÍâÖ±²¥bÕ¾

important

Note: This is the 2023–2024 eCalendar. Update the year in your browser's URL bar for the most recent version of this page, or .

Master of Science, Applied (M.Sc.A.) Bioresource Engineering (Non-Thesis): Environmental Engineering (45 credits)

Offered by: Bioresource Engineering     Degree: Master of Science Applied

Program Requirements

This inter-departmental graduate program leads to a master's degree in Environmental Engineering. The objective of the program is to train environmental professionals at an advanced level. The program is designed for individuals with an undergraduate degree in engineering. This non-thesis degree falls within the M.Eng. and M.Sc. programs which are offered in the Departments of Bioresource, Chemical, Civil, and Mining, Metals, and Materials Engineering.

Research Project (6 credits)

  • BREE 671 Project 1 (6 credits) *

    Offered by: Bioresource Engineering (Agricultural & Environmental Sciences)

    Administered by: Graduate Studies

    Overview

    Bioresource Engineering : Supervised research project.

    Terms: Fall 2023, Winter 2024, Summer 2024

    Instructors: Madramootoo, Chandra A; Qi, Zhiming (Fall) Qi, Zhiming; Madramootoo, Chandra A (Winter) Qi, Zhiming; Ngadi, Michael O; Madramootoo, Chandra A; Kwofie, Ebenezer; Clark, Grant (Summer)

    • Restriction: Not open to students who have taken ABEN 671 or ABEN 671D1/D2.

  • BREE 672 Project 2 (6 credits)

    Offered by: Bioresource Engineering (Agricultural & Environmental Sciences)

    Administered by: Graduate Studies

    Overview

    Bioresource Engineering : Supervised research project.

    Terms: Fall 2023, Winter 2024, Summer 2024

    Instructors: Madramootoo, Chandra A; Qi, Zhiming (Fall) Qi, Zhiming; Madramootoo, Chandra A (Winter) Qi, Zhiming; Ngadi, Michael O; Madramootoo, Chandra A; Kwofie, Ebenezer (Summer)

    • Restriction: Not open to students who have taken ABEN 672 or ABEN 672D1/D2.

* BREE 671 may also be taken as part of this requirement.

Required Courses (9 credits)

  • BREE 533 Water Quality Management (3 credits)

    Offered by: Bioresource Engineering (Agricultural & Environmental Sciences)

    Overview

    Bioresource Engineering : The water phases of terrestrial ecological systems and the processes that link them. Physical, chemical, and biological properties of water, and water quality standards. The fate and transport of pollutants in rivers and streams, lakes, and wetlands. Methods to quantify soil carbon and nitrogen cycle to predict nutrient leaching. Impacts of human activities (e.g., agricultural drainage) on water quality and measures to improve drainage water quality. Assess the effectiveness of proposed engineering measures or management practices in improving or maintaining water quality of a real site/water body using numerical methods or a computer modelling approach.

    Terms: Fall 2023

    Instructors: Prasher, Shiv; Qi, Zhiming (Fall)

    • Restriction: Not open to students who have taken BREE 625 (formerly ABEN 625).

    • Management of water quality for sustainability. Cause of soil degradation, surface and groundwater contamination by agricultural chemicals and toxic pollutants. Screening and mechanistic models. Human health and safety concerns. Water table management. Soil and water conservation techniques will be examined with an emphasis on methods of prediction and best management practices.

    • This course carries an additional charge of $37.68 to cover the cost of transportation with respect to a field trip. The fee is refundable only during the withdrawal with full refund period.

  • CHEE 591 Environmental Bioremediation (3 credits)

    Offered by: Chemical Engineering (Faculty of Engineering)

    Overview

    Chemical Engineering : The presence and role of microorganisms in the environment, the role of microbes in environmental remediation either through natural or human-mediated processes, the application of microbes in pollution control and the monitoring of environmental pollutants.

    Terms: Fall 2023

    Instructors: Yerushalmi, Laleh (Fall)

    • (3-0-6)

  • CIVE 615 Environmental Engineering Seminar (3 credits)

    Offered by: Civil Engineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    Civil Engineering : The course will expose the students to various environmental engineering issues. Lectures will be given by faculty and invited speakers from industry. Each student is required to prepare a written technical paper and make oral presentation.

    Terms: Fall 2023

    Instructors: Ozcer, Pinar (Fall)

Complementary Courses (19 credits)

Data Analysis Course

3 credits from the following:

  • AEMA 611 Experimental Designs 1 (3 credits)

    Offered by: Plant Science (Agricultural & Environmental Sciences)

    Administered by: Graduate Studies

    Overview

    Mathematics (Agric&Envir Sci) : General principles of experimental design, split-plot designs, spatial heterogeneity and experimental design, incomplete block designs and unbalanced designs, analysis of repeated measures, multivariate and modified univariate analyses of variance, central composite designs.

    Terms: This course is not scheduled for the 2023-2024 academic year.

    Instructors: There are no professors associated with this course for the 2023-2024 academic year.

    • 3 hours lectures and 1 conference

    • Prerequisite: AEMA 310 or equivalent

  • CIVE 555 Environmental Data Analysis (3 credits)

    Offered by: Civil Engineering (Faculty of Engineering)

    Overview

    Civil Engineering : Application of statistical principles to design of measurement systems and sampling programs. Introduction to experimental design. Graphical data analysis. Description of uncertainty. Hypothesis tests. Model parameter estimation methods: linear and nonlinear regression methods. Trend analysis. Statistical analysis of censored data. Statistics of extremes.

    Terms: Winter 2024

    Instructors: Nguyen, Van-Thanh-Van (Winter)

    • (3-0-6)

    • Prerequisite (Undergraduate): CIVE 302 or permission of instructor

  • PSYC 650 Advanced Statistics 1 (3 credits)

    Offered by: Psychology (Faculty of Science)

    Administered by: Graduate Studies

    Overview

    Psychology : A course in advanced statistics with specialization in experimental design.

    Terms: Fall 2023

    Instructors: Miocevic, Milica (Fall)

Toxicology Course

3 credits from the following:

  • OCCH 612 Principles of Toxicology (3 credits)

    Offered by: Occupational Health (Faculty of Medicine and Health Sciences)

    Administered by: Graduate Studies

    Overview

    Occupational Health & Hygiene : General principles of toxicology, routes of toxicant entry, human organs as targets of toxic action, adverse effects, time-course of reactions to toxicants. Risk assessment techniques, in vivo-in vitro toxicity models, links between human population observations and animal, cellular and biochemical models.

    Terms: Fall 2023

    Instructors: Heroux, Paul (Fall)

  • OCCH 616 Occupational Hygiene (3 credits)

    Offered by: Occupational Health (Faculty of Medicine and Health Sciences)

    Administered by: Graduate Studies

    Overview

    Occupational Health & Hygiene : An introduction to the principles and practices of industrial hygiene designed to provide the students with the knowledge required to identify health and safety hazards in the workplace.

    Terms: Fall 2023

    Instructors: Gauvin, Jean-Pierre (Fall)

Water Pollution Engineering Course

4 credits from the following:

  • CIVE 651 Theory: Water / Wastewater Treatment (4 credits)

    Offered by: Civil Engineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    Civil Engineering : Theoretical aspects of the chemistry of water and wastewater treatment. This will include acid-base and solubility equilibria; redox reactions; reaction kinetics; reactor design; surface and colloid chemistry; gas transfer; mass transfer; stabilization and softening; disinfection; corrosion.

    Terms: Winter 2024

    Instructors: Liu, Jinxia (Winter)

  • CIVE 652 Bioprocesses for Wastewater Resource Recovery (4 credits)

    Offered by: Civil Engineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    Civil Engineering : Technologies and design approaches for reclaiming water, nutrients, carbon and energy, while achieving protection of human and environmental health in the context of enhancing sustainability. Unit processes for both wastewater and solids-handling trains. Advanced mathematical modeling to describe suspended-growth and attached-growth multispecies bioreactors for aerobic, anaerobic and phototrophic processes. Microbial diversity in different reactor conditions, and specific population metabolisms explaining important stoichiometries and kinetics. Advanced molecular microbiology techniques to document microbial diversity and dynamics. Bioreactor designs in the context of stakeholder interactions and energy efficiency.

    Terms: This course is not scheduled for the 2023-2024 academic year.

    Instructors: There are no professors associated with this course for the 2023-2024 academic year.

  • CIVE 660 Chemical and Physical Treatment of Waters (4 credits)

    Offered by: Civil Engineering (Faculty of Engineering)

    Administered by: Graduate Studies

    Overview

    Civil Engineering : Theory and design of specific processes used for the physical and/or chemical purification of waters and wastewaters, including mixing, flocculation, sedimentation, flotation, filtration, disinfection, adsorption, ion exchange, aeration, membrane processes, distillation, removal of specific inorganics and organics, taste and odour control, process control, sludge treatment. Laboratory exercises will complement theoretical aspects.

    Terms: Winter 2024

    Instructors: Ozcer, Pinar (Winter)

Air Pollution Engineering Course

3 credits from the following:

  • CHEE 592 Industrial Air Pollution Control (3 credits)

    Offered by: Chemical Engineering (Faculty of Engineering)

    Overview

    Chemical Engineering : Air pollution effects, control laws and regulations, measurements; emission estimates, meteorology for air pollution control engineers, dispersion models, nature of particulate pollutants, control of primary particulates, control of volatile organic compounds, sulfur oxides and nitrogen oxides; air pollutants and global climate.

    Terms: This course is not scheduled for the 2023-2024 academic year.

    Instructors: There are no professors associated with this course for the 2023-2024 academic year.

    • (3-0-6)

    • Prerequisite: CHEE 314 or permission of instructor.

    • Restriction: Not open to students who have taken CHEE 472.

  • MECH 534 Air Pollution Engineering (3 credits)

    Offered by: Mechanical Engineering (Faculty of Engineering)

    Overview

    Mechanical Engineering : Pollutants from power production and their effects on the environment. Mechanisms of pollutant formation in combustion. Photochemical pollutants and smog, atmospheric dispersion. Pollutant generation from internal combustion engines and stationary power plants. Methods of pollution control (exhaust gas treatment, absorption, filtration, scrubbers, etc.).

    Terms: This course is not scheduled for the 2023-2024 academic year.

    Instructors: There are no professors associated with this course for the 2023-2024 academic year.

or an approved 500-, 600-, or 700-level alternative course.

Environmental Impact Course

3 credits from the following:

  • GEOG 601 Advanced Environmental Systems Modelling (3 credits)

    Offered by: Geography (Faculty of Science)

    Administered by: Graduate Studies

    Overview

    Geography : Simulation of environmental systems, focusing on problem definition, model development and model validation.

    Terms: This course is not scheduled for the 2023-2024 academic year.

    Instructors: There are no professors associated with this course for the 2023-2024 academic year.

    • Restriction: Students taking this course need to have an undergraduate background in an atmospheric, ecological, earth,or environmental science or an undergraduate background in environmental engineering.

or an approved 500-, 600-, or 700-level alternative course.

Environmental Policy Course

3 credits from the following:

  • URBP 506 Environmental Policy and Planning (3 credits)

    Offered by: Urban Planning (Faculty of Engineering)

    Overview

    Urban Planning : Analytical and institutional approaches for understanding and addressing environmental issues at various scales; characteristics of environmental issues, science-policy-politics interactions relating to the environment, and implications for policy; sustainability, and the need for and challenges associated with interdisciplinary perspectives; externalities and their regulation; public goods; risk perception and implications; the political-institutional context and policy instruments; cost-benefit analysis; multiple-criteria decision-making approaches; multidimensional life-cycle analysis; policy implementation issues; conflict resolution; case studies.

    Terms: Fall 2023

    Instructors: Badami, Madhav Govind (Fall)

    • (3-0-6)

    • Restriction: This course is open to students in U3 and above

or an approved 500-, 600-, or 700-level alternative course.

Further complementary courses (balance of coursework to meet the 45-credit program requirement):

Remaining Engineering or Non-Engineering courses from an approved list of courses, at the 500, 600, or 700 level, from the Faculty of Engineering, Faculty of Agricultural and Environmental Sciences, Faculty of Law, Faculty of Religious Studies, Desautels Faculty of Management, and Departments of Atmospheric and Oceanic Sciences, Biology, Chemistry, Earth and Planetary Sciences, Economics, Epidemiology and Biostatistics, Geography, Occupational Health, Political Science, Sociology, and the Bieler School of Environment.

Faculty of Agricultural & Environmental Sciences—2023-2024 (last updated Sep. 12, 2023) (disclaimer)
Back to top